14 Rockwell Automation Publication 750-RM004A-EN-P - April 2018
Chapter 1 Selection Considerations
PowerFlex 700S frames 9…14 drives could be specified as standalone 3-phase
AC input with non-regenerative 6-pulse converter or as DC input type.
PowerFlex 700S frames 1…6 drives do not have equivalent PowerFlex 755T
ratings at the time this document was published. If you have PowerFlex 700S
frame sizes 1…6, consult an Authorized Rockwell Automation Distributor
specialist, Solution Partner, Recognized System Integrator or Rockwell
Automation account manager to determine if there is a suitable PowerFlex 750
product that will be a satisfactory migration solution.
IMPORTANT PowerFlex 700S DC input drives do not have factory-installed precharge
circuits. If precharge circuits were required these circuits were provided
separately by the drive user. If you have concerns about your DC input
common bus PowerFlex 700S drive system configurations consult an
Authorized Rockwell Automation Distributor specialist, Solution Partner,
Recognized System Integrator or Rockwell Automation account manager to
discuss PowerFlex 700S DC input drive migration solutions.
To Next Page
Loading...
Need help?
General
