6 Rockwell Automation Publication 750-RM004A-EN-P - April 2018
Preface
Chapter 3: Communication Configuration on page 113.
This chapter identifies PowerFlex 700S communication network protocols
that can be migrated to PowerFlex 755T products. This section also provides
information about velocity reference/feedback scaling, how to use I/O
adapters, and 16 bit-based processors.
Abbreviations
This table contains abbreviations that are used throughout this document.
Abbreviation Description
(o) Optional equipment
(s) Standard, or included in base catalog number
AFE Active Front End
AOP Add On Profile
CBI Common Bus Inverter
EMI Electromagnetic Interference Filter
ESD Electrostatic Discharge
HD Heavy Duty Overload Rating
HIM Human Interface Module
I/O Input/Output
LD Light Duty Overload Rating
LSC Line Side Converter
MCC Motor Control Center
MOV Metal Oxide Varistor
ND Normal Duty Overload Rating
PLC Programmable Logic Controller
PWM Pulse-width Modulated
RWR Reflective Wave Reduction
SCCR Short Circuit Current Rating
TAM Torque Accuracy Module
TVSS Transient Voltage Surge Suppressor
XLPE Cross-linked Polyethylene
To Next Page
Loading...
Need help?
General
