146 Rockwell Automation Publication 750-RM004A-EN-P - April 2018
Appendix A Enclosure Information
IP00 Open Type Power
Structures
There are many possible engineered solutions for the IP00 Type Open power
structure installations. Contact an Authorized Rockwell Automation
Distributor specialist, Solution Partner, Recognized System Integrator or
Rockwell Automation account manager if you are interested in migrating your
PowerFlex 700S open type bus supply converter to a PowerFlex 755T open
type products.
Follow this link for a list of Solution Partners and Recognized System
Integrators:
http://www.software.rockwell.com/corporate/sp/
RASISearchResults.cfm?Programlevel=SP
The installation instructions below provide technical information for installing
the PowerFlex 700 high power and PowerFlex 755TM open type products in a
customer-supplied enclosure. Review these instructions for technical
specifications and information that can help you engineer a solution for your
IP00 Type Open migration.
• PowerFlex 700H and 700S Open Power Structure, Frames 10…14
Installation Instructions, publication PFLEX-IN020
• PowerFlex 755TM IP00 Open Type Kits Installation Instructions,
publications 750-IN101
, 750-IN102, and 750-IN103
• PowerFlex 755TM IP00 Open Type Kits Technical Data, publication
750-TD101
.
ATTENTION: Only qualified personnel familiar with adjustable frequency AC
drives and associated machinery should plan or implement the installation,
startup, and subsequent maintenance of the system. Failure to comply may
result in personal injury and/or equipment damage.
IMPORTANT IP00 type open installations are not standard solutions. These installations
are engineered solutions and migration to a PowerFlex 755T open type
solution requires a careful technical review of your existing PowerFlex 700S
installation as well as careful technical planning and design of the PowerFlex
755T open type solution.
To Next Page
Loading...
Need help?
General
