Preface
Overview
Drive Description
The PowerFlex 700 High Power AC drives consist of the 700H and 700S
products. Both are available in power ratings from 200 to 600 HP (132 kW
to 355 kW) normal duty, at input voltages from 380V to 500V.
The 700H features a parameter set modeled after the PowerFlex 700 AC
drive. Standard I/O includes either 24V or 115V digital I/O plus analog I/O
NetLinx™ communication options, including DeviceNet™, ControlNet™
and EtherNet/IP networks.
The PowerFlex 700S offers optimized integration for the most demanding
drive control and drive system applications. Available with embedded
high-performance Logix engine (DriveLogix) to produce a highly
functional, cost-effective drive and control solution.
Who Should Use this
Manual?
This manual is intended for qualified personnel. You must be able to mount
and wire Adjustable Frequency AC Drive devices.
What Is Not in this Manual
This manual is designed to provide drive mounting and wiring information.
For start-up, programming and troubleshooting information, refer to the
appropriate manual listed below.
Reference Materials
Allen-Bradley publications are available on the internet at
www.rockwellautomation.com/literature.
The following manuals are recommended for general drive information:
The following manuals are recommended for detailed PowerFlex 700H
information:
Title Publication
Industrial Automation Wiring and Grounding Guidelines 1770-4.1
Preventive Maintenance of Industrial Control and Drive System
Equipment
DRIVES-TD001A-EN-E
Safety Guidelines for the Application, Installation and Maintenance
of Solid State Control
SGI-1.1
A Global Reference Guide for Reading Schematic Diagrams 0100-2.10
Guarding Against Electrostatic Damage 8000-4.5.2
Title Publication
PowerFlex Reference Manual PFLEX-RM001
PowerFlex 700H Programming Manual 20C-PM001
To Next Page
Loading...
Need help?
General
