Rockwell Automation Publication PFLEX-RM003E-EN-E - January 2011 3
Summary of Changes
This manual contains new and updated information.
New and Updated
Information
This table contains the changes made to this revision.
Topic Page
Removed content of previous Chapter 1 - Specifications and
Dimensions.
See the PowerFlex 700S AC Drives, Phase II Control Technical Data,
publication 20D-TD002 for the most current specifications and drive
dimension information.
NA
Updated all references to the PowerFlex 700S AC Drive Phase II
Control User Manual, publication 20D-UM006, to the following
publications as applicable:
• PowerFlex 700S AC Drive Phase II Control Programming Manual,
publication 20D-PM001
• PowerFlex 700S AC Drive Phase II Control Frames 1…6
Installation Instructions, publication 20D-IN024
• PowerFlex 700H and 700S Frame 9…14 Drives Installation
Manual, publication PFLEX-IN006
(Multiple pages)
Updated the Permanent Magnet Motor Control section to include
information on Heidenhain encoders.
70
Updated the “Ride Through Configuration” section to describe the
conditions that will cause the “RideThru” (F92) alarm to occur.
111
To Next Page
Loading...
Need help?
General
