Rockwell Automation MD60 - Problem: Drive will Not Reverse Motor; Direction; Table 10.7 - Problem: Drive will Not Reverse Motor Direction

Troubleshooting the Drive 10-9
10.2.6 Problem: Drive Will Not Reverse Motor
Direction.
Table 10.7 – Problem: Drive Will Not Reverse Motor Direction
Cause(s) Indication Corrective Action
Digital input is not selected
for reversing control.
None Check (Digital Inx Select).
Choose correct input and
program for reversing mode.
Digital input is incorrectly
wired.
None Check input wiring.
Motor wiring is improperly
phased for reverse.
None Switch two motor leads.
Reverse is disabled. None Check A095 (Reverse
Disable).