Rockwell Automation PowerFlex series - Page 274

Index-6
PowerFlex Digital DC Drive User Manual - Publication 20P-UM001C-EN-P - July 2008
Fault 7 Time 3-53
Fault 8 Code 3-53
Fault 8 Time 3-53
Fault 9 Code 3-53
Fault 9 Time 3-53
Fault Arm Amps 3-53
Fault Clear 3-52
Fault Clr Mask 3-58
Fault Clr Mode 3-52
Fault Clr Owner 3-59
Fault Field Amps 3-53
Fault Queue B-4
Fault Speed 3-53
Fault Voltage 3-53
FaultCode 3-13
Faults
AC Undervoltage 4-4
Arm Overvoltage 4-4
Auxiliary Input 4-4
Descriptions 4-4
Drive Overload 4-4
Dsp Error 4-4
EEPROM Error 4-4
Encoder Loss 4-4
Fld Current Loss 4-4
Hardware Fault 4-5
Heatsink OvrTemp 4-5
Interrupt Error 4-5
Inverting Fault 4-5
Main Contactor 4-5
Manually Clearing 4-3
Motor Over Temp 4-5
No Fault 4-5
Non-Configurable 4-1
Overcurrent 4-5
Overspeed 4-5
Params Defaulted 4-5
Port 1 Adapter 4-5
Port 1 DPI Loss 4-6
Port 2 Adapter 4-5
Port 2 DPI Loss 4-6
Port 3 Adapter 4-5
Port 3 DPI Loss 4-6
Port 4 Adapter 4-5
Port 4 DPI Loss 4-6
Port 5 Adapter 4-5
Port 5 DPI Loss 4-6
Power Failure 4-6
STune Aborted 4-6
STune CurLimit 4-6
STune FrictionLo 4-6
STune LoadHi 4-6
User Configurable 4-1
Visual Notification 4-3
Faults Group 3-52, 3-53
Fdbk Device Type 3-19
Feed Fwd PID 3-37
Field Circuit Terminal Block
Location, Frame A 1-23
Location, Frame B 1-23
Location, Frame C 1-24
Field Config Group 3-14, 3-15, 3-16
Field Converter
Votage Regulator Tuning C-31
Field Current 3-12