12-70
SP600 AC Drive User Manual
Selects the function whose value is displayed in Testpoint 1 Data
(235). These are internal values that are not accessible through
parameters.
Note: This is a factory diagnostic function.
The present value of the function selected in Testpoint 1 Sel (234).
Note: This is a factory diagnostic function.
Selects the function whose value is displayed in Testpoint 2 Data
(237). These are internal values that are not accessible through
parameters.
Note: This is a factory diagnostic function.
The present value of the function selected in Testpoint 2 Sel (236).
Note: This is a factory diagnostic function.
234 Testpoint 1 Sel
Range: 0 to 65535 [1]
Default: 499
Access: 2 Path: Utility>Diagnostics
See also: 235
235 Testpoint 1 Data
Range: 0 to 4,294,697,295 [1]
Default: 0
Access: 2 Path: Utility>Diagnostics
See also: 234
236 Testpoint 2 Sel
Range: 0 to 65535 [1]
Default: 499
Access: 2 Path: Utility>Diagnostics
See also: 237
237 Testpoint 2 Data
Range: 0 to 4,294,967,295 [1]
Default: 0
Access: 2 Path: Utility>Diagnostics
See also: 236
To Next Page
Loading...
