Rockwell Automation Reliance electric SP600 Series - Page 205

Parameter Descriptions 12-75
Indicates inputs that are presently issuing a valid stop command.
Indicates the port that is supplying the manual mode speed
reference and control.
288 Stop Owner
Range: See figure 12.45
Default: Read Only
Access: 2 Path: Communication>Masks & Owners
See also: 276 - 285
Figure 12.45 – Stop Owner
x
xxxxx
10 01234567891112131415
1=Enabled
0=Disabled
x =Reserved
Bit #
Factory Default Bit Values
Local OIM
DPI Port 2
Nibble 1Nibble 2Nibble 3Nibble 4
x
x
Terminal Blk
Reserved
Network
DPI Port 3
Reserved
xx
x
0
00
0
0
Source Location
Terminal Blk 24V Logic I/O
DPI Port 1 Local OIM
DPI Port 2
DIN Port
1
1
Typically connected to remote OIMs.
DPI Port 3
Split DIN Port
1
DPI Port 5 Network
298 Manual Owner
Range: See figure 12.46
Default: Read Only
Access: 2 Path: Communication>Masks & Owners
See also:
Figure 12.46 – Manual Owner
0000x0xxxxxxxxxx
10 01234567891112131415
1= Control is Enabled
0= Control is Disabled
x =Reserved
Bit #
Factory Default Bit Values
Terminal Blk
Local OIM
DPI Port 2
DPI Port 3
Reserved
Network
Reserved
Nibble 1Nibble 2Nibble 3Nibble 4