Rockwell Automation Reliance electric SP600 Series - Table A.5 - Control; Table A.6 - Control Inputs, Outputs, and Power Supplies

Technical Specifications A-5
Electronic Motor
Overload
Protection
Class 10 protection with speed-sensitive
response. Investigated by U.L. to comply with
N.E.C. Article 430. U.L. File E59272, volume 12.
Table A.5 – Control (Continued)
Table A.6 – Control Inputs, Outputs, and Power Supplies
Analog Input 1,
Differential Voltage Input
Signal level
Differential Input resistance
Isolation
Initial accuracy (@25°C)
Resolution
Input processing period
Terminal block size
Protection
0 to +10V
60kΩ
±17V
±0.3%
10 bits (0.1%)
5ms
0.05 mm
2
to 1.5 mm
2
(30 AWG to
16 AWG)
ESD protected (6 kV contact
discharge, 8 kV air discharge)
Analog Input 1,
Differential Current Input
Signal level
Differential Input resistance
Isolation
Initial accuracy (@25°C)
Resolution
Input processing period
Terminal block size
Protection
0(4) to 20mA
100Ω
±9V
±0.3%
10 bits (0.1%)
5ms
0.05 mm
2
to 1.5 mm
2
(30 AWG to
16 AWG)
ESD protected (6 kV contact
discharge, 8 kV air discharge)
Analog Input 2,
Differential Voltage Input
Signal level
Differential Input resistance
Isolation
Initial accuracy (@25°C)
Resolution
Common Mode Rejection Ratio
Input processing period
Terminal block size
Protection
-10V to +10V
88kΩ
±165V
±0.3%
10 bits (0.1%)
70dB up to 500Hz over temperature
range
5ms
0.05 mm
2
to 1.5 mm
2
(30 AWG to
16 AWG)
ESD protected (6 kV contact
discharge, 8 kV air discharge)