Rockwell Automation Publication 6200-UM001C-EN-P - July 2018 37
Chapter 5
Configure the UEFI (BIOS) Settings
Set-up Utility Overview
The set-up utility is a hardware configuration program built into the
universal
extensible firmware interface (UEFI)
.
In this chapter, UEFI replaces Basic
Input/Output System (BIOS) to describe the system firmware except where
BIOS is specifically used, such as on a graphical interface
.
You can run the set-up utility to do the following:
• Change the system configuration.
• Set the time and date as part of a commissioning step.
• Redefine communication ports to help prevent any conflicts.
• Read the current amount of system memory.
• Change the boot drive order.
• Set or change the password or make other changes to the security
settings.
Topic Page
Set-up Utility Overview 37
Access the Set-up Utility 38
UEFI Overview 38
H/W Monitor 38
Security 38
Restore the OS Image 39
Upgrade to a New UEFI 40
TIP A commissioning step is one of the following situations:
• When the thin client or computer is powered up initially
• When the Windows OS image is restored (on VersaView® 5400
computers)
• When the UEFI set-up utility is upgraded
To Next Page
Loading...
Need help?
General
