Rockwell Automation Publication 6200-UM001C-EN-P - July 2018 39
Configure the UEFI (BIOS) Settings Chapter 5
Restore the OS Image
Perform the following steps to restore your computer with a backed-up OS image
on an external USB storage drive.
1. Attach the following external peripherals to your computer:.
• Display (for non-display computers)
•USB Keyboard
• USB drive (16 GB or larger)
2. Access the Rockwell Automation® PCDC website at
https://compatibility.rockwellautomation.com/Pages/home.aspx
.
3. On the home page, click Find Downloads.
4. On the Find Downloads page, use your computer model as the sear
ch
cri
teria.
5. Follow the instructions on the PCDC site to find your OS image.
6. Download the OS Image file to your USB drive.
7. After the file downloads, restart the computer.
8. During POST, press F5 to access the Boot menu.
9. Toggle down the Boot menu to select RecoveryDISK and press Enter.
10. To apply the image, follow the onscreen instructions.
11. The OS image file on the USB drive copies to the system.
12. After the OS image
restore is complete, restart the computer.
13. When you restore the OS image, it is identical to starting the computer
for the first time.
See Connect Power on page 29 for what actions occur.
TIP You must be registered with the Rockwell Automation PCDC
website to download files.
You must accept a User Agreement before files can be downloaded.
WARNING: Do not interrupt power to the computer during the OS
image restore.
Sudden power loss can render the computer inoperable.
To Next Page
Loading...
Need help?
General
