Rockwell Automation Publication 6200-UM001C-EN-P - July 2018 43
Configure the UEFI (BIOS) Settings Chapter 5
12. Type update.nsh and press Enter (D).
The BIOS update procedure starts automatically.
13. Once the BIOS flash procedure is completed, the computer
automatically restarts.
IMPORTANT Ignore any ‘Cannot find any ESP partition!’ messages during the
update.
WARNING: The computer automatically restarts twice during the
update. Do not disconnect power from the computer until after the
second restart, which is when the BIOS flash procedure is completed.
If power is disconnected before the second restart, it can render the
computer inoperable.
To Next Page
Loading...