2-5. NETWORK
Under Network menu, Network options such as network Address, DDNS, Remote Notification,
and Transmission can be configured.
2-5-1. MENU > NETWORK > Address
In Address screen, network information such as Type, IP address, Subnet Mask, Gateway Port,
and DNS can be configured.
Type: Select the type of network configuration from: Static IP, DHCP, and ADSL(with PPPoE).
IP Address: Enter IP address using button.
Subnet Mask: Enter Subnet Mask using button.
Gateway: Enter Gateway using button.
DNS: Enter the IP address of the DNS server. DNS Server enables the user to use a domain
name instead of the IP address through a DDNS service.
DNS sever address automatically: Select this option to get DNS Server Address automatically
from the server when using DHCP or PPPoE option.
In Port screen, Select appropriate port number for remote access to the system. The port list
shows ports that need to be opened for each operation.
Network Port: Set port for Remote Client access.
Web Port: Set port for Remote Client access over the web browser.
RTSP Port: Set port for Android based devices.
iPhone Port: Set port for iPhone.
Note
: ID and Password are required in ADSL(with PPPoE) type.
Note
: Default TCP port is 10101, but it can be set in between 1500 and 32000 if it is necessary.
UPnP Option: By checking the UPnP option, it automatically sets the ports on the connected
router.
Note
: The router should support UPnP option for this feature. If the same ports are already
being used, DVR displays a message asking to try other ranges.
To Next Page
Loading...
General