ROHS Performance Series - Appendix A. Remote Access Using I.E

79
Appendix A. Remote Access Using I.E.
Users can access the DVR‟s Setup, Live Web Monitoring, and Playback functions through a
Internet Explorer.
4-1. Login
Open up internet explorer window. Users can access to the DVR‟s Remote Monitoring System by
entering DVR‟s IP address or its registered hostname in the Internet Explorer‟s address bar.
Ex) When web port is 80(by Default) – http://hostname.autoipset.com or 211.104.176.143
Ex) When web port is not the default value – http://hostname.autoipset.com:Web port or
211.104.176.143:Web port Ex) http://hostname.autoipset.com:8080 or
211.104.176.143:8080
Port numbers can be checked at DVR MENU > Network > Address > Port
Note : Web Viewer is supported only on Internet Explorer 7.0 or above.
At the DVR‟s login page, User should input correct ID, Password, and Port Number in order to
access Live or Playback function of the DVR.
 ID : DVR‟s Administrator ID or User ID (Default ID: admin or user)
 Password : DVR‟s Password for the administrator or a user (Default Password :
“1111”)