3. How to use Network Archiver
Start Network Archiver(Archiving) by using Schedule Wizard(New Schedule).
Step 1) Entering Archiving Site address and following information for a site
registration and log-in.
Name : Enter the Site name.
Address : Enter the Site address for Remote Archiving.
Playback Port : Enter Playback Port for the site. The default setting value is 10102 and it
depends on the network setting of the local site.
Note: Network Archvier requires to set Playback Port as a DVR for its network connection.
User / Password : Enter User and Password to log in. User has to be set with authority of
Network Playback.
To Next Page
Loading...