2-1-2. MENU > SYSTEM > Date & Time
In the Date & Time menu, Time Zone, Date,
Time, NTP Server, and Holiday options can be
selected.
Highlight and press Time Zone to select
appropriate Time Zone.
Select „Use Daylight Saving Time‟ if it is
applicable. Enter start and end date/time for
local „Daylight Saving Time‟.
Press button to set up Date and Time. Press Format button to select a date & time display
format.
Select „Use NTP‟ to enter Time Servers to be
synchronized with the DVR. Highlight and press
to enter the address of Time Server using
the virtual keyboard. Press „Update‟ to
synchronize the DVR‟s clock with the registered
time server.
Note
: NTP is not an essential part of the DVR‟s
operation. Any type of Standard Time Server
can be used (e.g. time.windows.com). Time
Synch might not be completed due to heavy traffic or delays from the Time Synch server.
Press Holiday to set specific dates for Holiday
setup. Set specific date by pressing button.
Change and delete dates using and
buttons.
Note
: Please update this every year since
some holidays change yearly.
2-1-3. MENU > SYSTEM > User
Press User Tab to enter/add a new user.
Auto Login: It allows an automatic log-in into the system when the system is booted up. Since
this is an automatic log in without the authentication process, please make sure the DVR has a
limited access by non-authorized personnel.
To Next Page
Loading...