3. Setup
3-1. Remote Software Setup
Click on and Setup to enter setup menu.
Product: Displays general information of the S/W
Software Version: Displays current S/W version
Secondary Monitor: Select the secondary monitor if using multiple monitors
Event Pop-up Duration: Set the duration for the camera to be displayed in full screen in the
event situation.
Reconnect Automatically: Set auto reconnection on Live mode in case of disconnection for
any reason.
Load: Load saved configuration data.
Save as: Save current configurations
Default: Reset to default configuration
Log...: Displays the history of S/W usage
To Next Page
Loading...
General