Standby mode energy savings
When you turn off your TV, it remains in a higher power mode for a few minutes, after which it goes into
a very low power standby mode. If you turn on the TV again before it has entered the very low power
mode, it turns on immediately. After the TV goes into the lower power standby mode, it takes a few
seconds longer to start up.
Watching broadcast TV channels
To watch broadcast TV, select the Antenna TV tile in the Home screen. Your TV remembers the last
channel you watched and starts with that channel playing.
Changing channels
To change channels, you can do any of the following:
Press the UP arrow to change to the next higher channel.
Press the DOWN arrow to change to the next lower channel.
Press the LEFT arrow to display the channel list, and then press the UP and DOWN arrows to
move the highlight through the list one channel at a time. Or press REWIND and FAST
FORWARD to move the highlight through the list one page at a time. When you’ve highlighted
the channel you want to watch, press OK. (If you decide you don’t want to change channels,
press the BACK button).
Press to jump to the previous channel. Press again to return to the channel you were
watching before you pressed .
Note: If is not available on your remote control, you can use this feature in the Roku mobile app.
For more information, see Getting and using the Roku mobile app.
To Next Page
Loading...
