Re-pairing your Enhanced Remote Control
The Enhanced Remote Control operates with wireless radio-frequency signals and must be paired with
your TV. You paired it initially when you set up your TV during Guided Setup. But if your remote control
loses its pairing with the TV for some reason, you can easily re-pair it using either of the following
methods:
1. Remove the battery cover from the back of the remote control.
2. Press and hold down the pairing button for 3 seconds or longer, until the adjacent LED lights up.
3. Do one of the following:
Turn on the TV using the power button on the TV side or back panel. Pairing occurs as the TV
starts up.
Use the Roku mobile app or a different remote control to navigate to Settings > Remote >
Pair remote.
Tip: If the remote fails to pair with the TV, try installing new batteries. Also, it’s helpful to hold the
remote within two to three feet of the TV to ensure successful pairing.
Checking the Enhanced Remote Control battery level
You can check the condition of the batteries in your Enhanced Remote Control at any time by navigating
to Settings > Remote control > Battery level. The resulting screen displays not only the battery level, but
also other information that can be useful when you need technical support with your remote control.
Tip: When you first turn on the TV, an battery level indicator appears in the upper right corner of the
screen for a few seconds.
To Next Page
Loading...
