3. Click Download Software, and then save the file to the root
folder of a standard USB flash drive.
4. When the download finishes, take the USB flash drive to the TV
and plug it into the USB port. When you do, the TV validates the
files on the flash drive and displays a 12-digit code.
5. Write down the code and the web address, and take this
information back to your Internet-connected computer.
6. On the 12-digit code page, enter the code your TV displayed,
and then click Next.
7. On the 6-digit code page, write down the 6-digit code that
appears, and then take it back to your TV.
8. Using the TV remote control, select Next to move to the next
screen, and then use the on-screen keyboard to enter the 6-digit
code. When finished, select OK. The system update begins. Do
not remove the USB flash drive until the TV restarts.
When the update finishes, the TV restarts. You can check the new version number by navigating to
Settings > System > About.
USB flash drive
Any normal USB flash drive will work,
provided it has a FAT-16 or FAT-32
file system format. (This is the
default for most flash drives.)
The size of the download is small—
usually less than 100 MB—and so
will fit on most any size flash drive
The USB update process uses a pair
of codes to validate that you are
authorized to install an update, and
to ensure you are not attempting to
install an old, unsupported version of
the system software.
To Next Page
Loading...
