,.
iFREQUENCY
,
Set here is the cutoH Irequency for the low-pass lilter
The filter allows output
01
only Ihose Irequency bands
that are lower than the
Irequency
set
here. When set
to
"THRU", the filler allows output
01
alilrequency bands
VALUE:
500Hz-B,OOkHz and THRU
Since
this
filter
is applied only to the reverberation sounds,
no
change
is made
in
the direct sounds_
,.
iPREDE11AY
Setting
which
determines the amount
Of
time that will
pass between sounding
01
the direct sound and that
01
the reverberation sound.
VALUE:
(}-100ms
,.
lEFF.ECJl£VEL
Sets the amplitude
01
the reverberation sound (reverb
sound) respective
to
the direct sound, The higher the
value
is
set, the greater the reverb sounds become.
F:EJ')EF:E:
:::::
~
LEi
.
.IEL=
VALUE:
(}-100
42
dl·(i>
lINEOUT
FILTER
For use when recordtng using Lme Outputs, or for tone
control tor a guitar amplifier when
a
power
amplifier
is
connected dJ{ectly
to
monttorlng speakers, It provides
-adjustment
lor the overall
sound
quality
01
the output,
When connected with a gUitar amplifier. the Llneout Filler
normally
would
be
turned off.
8Ul,
if
put on,
rt
can
be
used
as a powerful tone
controller.
•
PRESENCE
Adlusts the sound quality of the extremely high fre-
quency band. The higher the value is set, the more
emphasis
it
receives.
::
.J
,_.
F I L T E
F'
VALUE:
0-100
•
TREBlE
Adjusts the sound quality of the high frequency band.
The higher the value
is
set, the more emphasis
it
re-
ceives.
VALUE
0-100
Adjusts the sound quality of the middle Irequency band.
The higher the
value
is
sel, the more emphasis
it
re-
ceives.
iLl
t·~
t:
CI
U T F I L T E
F:
:
f'"l
I
D[ILE::::
VALUE: (}-100
To Next Page
Loading...
Need help?
General
