76
Chapter 4: A Wide Variety of Operations
Loading an Adjustment Value
1
Press the [MENU] key, and press the [ ] key
to make the following screen appear on the dis-
play.
2
Press the [ ] key to make the following screen
appear on the display.
3
Press the [ ] key to make the following screen
appear on the display.
4
Press the [ ] key to display the screen shown
in the figure.
Choose the memory number to load, then press
the [ENTER] key.
The selected adjustment value is loaded.
Environment Matching
If the machine's setting environment (temperature and humidity) changes, run the [ENV. MATCH] menu item to auto-
matically adjust the machine to a state optimized to the environment where it is installed.
For more information about environment-matching procedures, refer to "1-5 Switching On the Power for the First Time"
and see "Step 2: Match the Machine to the Environment Where Installed."
MENU
ADJUST BI-DIR
ADJUST BI-DIR
TEST PRINT
ADJUST BI-DIR
LOAD PRESETTING
This operation deletes adjustment values that are not saved in memory. If there are adjustment values that you want to
keep, save them in memory first.
4-5 Making Corrections for Printing
To Next Page
Loading...
Need help?
General