EasyManua.ls Logo

Roland SPD-S - Basic Operations for Patch Edit

Roland SPD-S
145 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
32
Chapter 1 Making a Performance/ Creating a Patch
Basic Operations for Patch Edit
This section describes the steps for setting a patch. Patch settings are made
using Patch Edit.
1
Press [PATCH] so you are in patch mode.
2
Press [-]/[+] to select a patch.
3
Press [EDIT] to go into Patch Edit.
[EDIT] lights at this time.
4
Press the PAGE buttons to select an item to be edited from those listed
below, and then press [ENTER].
To select another item after pressing [ENTER], press [EXIT].
For details on each item, see its reference page.
WAVE A
-> p. 34
WAVE B
-> p. 34
PAD CONTROL
-> p. 36
EFFECTS
-> p. 37
PATCH COMMON
-> p. 37
Listed below are patch utilities. See p. 33.
PAD COPY
PAD EXCHANGE
PAD INIT (Pad Initialize)
PATCH COPY
PATCH EXCHANGE
PATCH INIT (Patch Initialize)
5
Press the PAGE buttons to change the parameter for the item.
To change the individual settings for different playing surfaces, hit a playing
surface (such as a pad on the SPD-S, an external pad, or a foot switch) for
which the settings are to be changed to select it. A flashing pad indicator
indicates that the corresponding playing surface is selected.
6
While hitting the playing surface for monitoring the sound, press [-]/[+]
to change the parameter value.
7
Press [EXIT] and then repeat Steps 4 to 6 to continue Patch Edit
operations. Press [PATCH] to finish Patch Edit.
The SPD-S saves the settings (with “now writing..” indicated) and then
returns to the patch mode.
If you hold down [SHIFT] and
press [-]/[+], you can change
the patch number in steps of
10. If you hold down [+] and
press [-], or hold down [-] and
press [+], the patch number
changes quickly.
If there are any selectable
items, PAGE buttons ([<], [>]
or both) are lit.
When it is necessary to press
[ENTER], it is flashing.
While editing you can also
choose among pads/sounds
b
y pressing a PAGE button
while holding down [SHIFT].
If you hold down [SHIFT] and
press [FUNC], the parameter is
reset to its initial value.
SPDS_e.book 32 ページ 2003年5月31日 土曜日 午後10時43分

Table of Contents

Related product manuals