75
Chapter 7 Changing the Setup (Overall Environment)
Chapter 7
About the Setup Utilities
Please refer to the relevant reference page if you wish to make changes for
any of the following setup utilities.
* You can select the items listed below in Step 3 (p. 74) in “Basic Operations for Setup
Edit.” However, they are different in character from Setup Edit. To complete a
procedure, follow the procedure described on the relevant reference page.
•
BULK DUMP
-> p. 85
•
INIT/DELETE
(Initialize/Delete) -> p. 87
Steps 1 through 3 of “Basic
Operations for Setup Edit” are
identical to those carried out
for the setup utilities.
SPDS_e.book 75 ページ ２００３年５月３１日 土曜日 午後１０時４３分
To Next Page
Loading...
