Roland SPD-S User Manual

68
Chapter 6 Using a CompactFlash Memory Card
Basic Operations of Card Utilities
1
To insert a CompactFlash card, open the card slot cover on the left-
hand side of the SPD-S.
2
Select patch mode or wave mode.
3
Press [SHIFT] and [SETUP] (CARD UTIL).
If no CompactFlash card has been inserted, “no card!” is indicated and the SPD-S returns to the
original mode.
4
Select a utility from the following, and then press [ENTER].
Press PAGE buttons to choose the utility parameter. See reference pages for details of
the utilities.
• FILE IMPORT -> p. 69
• FILE EXPORT -> p. 71
• BACKUP LOAD -> p. 72
• BACKUP SAVE -> p. 73
• BACKUP DELETE -> p. 73
• CARD FORMAT -> p. 67
When the CompactFlash card is unformatted, only “CARD FORMAT” is displayed.
Press [PATCH] to select the
patch mode, or press [WAVE]
to select wave mode.
When there are any selectable
utilities, PAGE buttons ([<] or
[>], or both) will be lighted.
When you need to press
[ENTER], it starts blinking.
SPDS_e.book 68 ページ ２００３年５月３１日 土曜日 午後１０時４３分

Roland SPD-S Specifications

General

Pads	9
Sampling Frequency	44.1 kHz
Display	Backlit LCD
Effects	Reverb, Delay
Connectivity	MIDI In/Out, USB, Stereo Output, Headphone Output, Trigger Inputs
Power Supply	DC 9 V (AC Adaptor)