40
Chapter 1 Making a performance/Creating a patch
PATCH INIT (Patch Initialize)
Initializes the parameters for a patch.
1.
A “[>] to init.” indication appears. Press [>].
2.
“init patch, sure?” appears. Press [ENTER] to reset the parameters for the patch to their respective
initial values.
While initializing is in progress, “now processing..” is displayed. Upon completion of the procedure, “complete!” is
displayed, and you’re returned to the Patch mode.
SPDS_e.book 40 ページ ２００３年５月３１日 土曜日 午後１０時４３分
To Next Page
Loading...
