Roland VersaStudio BT-12 - Head Position

5.MachineSetupMenus
104

HeadPosition
Adjuststheprinthead.Performthisoperationifprintedlinesareverticallymisalignedorprinted
colorsareblurred.
Sun. Mon. T
31 12
789
14 15 16
Sun. Mon. T
31 12
789
14 15 16
DYX110
Head Position

Tocheckadjustmentvalues,printtestpatternsapplying"Thick,Standard","T‐shirtFine","T‐shirt
Speed","T‐shirtVivid"settings.
Check adjustment values for eachline(A,B,C),andadjustthe print head positions. If the
adjustmentvalue is setto "0",adjustment is notnecessary.Adjustall lines so theiradjustment
valuesindicate"0"
1.
Loadthefabricinthetray.
2.
Pressthe[ /Menu]key.
3.
Pressthe[ ]or[ /Menu]keytodisplay[Maintenance],andthenpressthe
[#Enter]key.

4.
Pressthe[ ]or[ /Menu]keytodisplay[HeadPosition],andthenpressthe
[#Enter]key.

<Maintenance>
HeadPosition
<Menu>
Maintenance