Roland VersaStudio BT-12 - Installing the Printer Driver

39
ConnectingtheComputerandInstallingtheSoftware(USBConnection)
4.
InserttheUSBcable'shexagonal(typeB)plugintotheport.
Checktheshapeanddirectionoftheplugandmakesurethecableisfullyinserted.
DYX018

5.
Closetheportcover.
DYX048

6.
InserttheUSBcable'srectangular(typeA)plugintothecomputer'sUSBport.
Checktheshapeanddirectionoftheplugandmakesurethecableisfullyinserted.

• WhenalsosharingthemachineconnectedviaUSBoveranetwork,connectthemachineto
thecomputerinaccordancewiththeexplanationabove.Forthesharesettings,seepage43
"SharingthePrinter".
InstallingthePrinterDriver
Oncethemachineisconnectedtothecomputer,installtheprinterdriver.
Therearetwoinstallationmethods.Installtheprinterdriverusingoneofthesemethods.
• QuickInstallforUSB
Installtheprinterdriverautomatically.Seepage40"QuickInstallforUSB".
• Manualinstall
Configurethesettingsoftheprinterdrivermanuallyandinstallit.Seepage41"Installingthe
printerdrivermanuallyusingaUSBcable".
