Roland VersaStudio BT-12 - Auto Head Maint

5.MachineSetupMenus
116
DYX041
1
2
3
1
2
3

1. Toppart
2. Innerpart
3. Sidepart
7.
AftercleaningtheMaintenanceUnit,closethetopcover.
Head‐cleaningstartsafterrestart,afterwhichthemachinereturnstotheusualcondition.
AutoHeadMaint.
Youcancleantheprintheadnozzlesautomatically.Ifthemessagepromptingyoutoprovide
regularmaintenanceappears,cleantheprinthead.



• Donotopenthecoverwhiletheprintheadnozzlesarebeingautomaticallycleaned.
• Youcannotreusetheabsorbent.Afterusingit,besuretodisposeitproperly.
• Ifyouhavenotcleanedthemaintenanceunit,proceedtocleanit.
• Donotputyourhandsinsidethemachinewhilecleaningoftheprintheadnozzlesis
automaticallyperformed.Yourfingersmaybetrappedandinjuredinsidethemachine.