Rosemount 3095 - Ordering Information

Rosemount Model 3095 Multivariable
™
Level Controller
6-6
ORDERING INFORMATION
(1) Meets NACE material recommendations per MR 01–75.
Model Product Description
3095C Level Controller
Code Output
A 4–20 mA with Digital Signal Based on
HART Protocol
Code Differential Pressure Range
2
3
0–2.5 to 0–250 inH
2
O (0–0.62 to 0–62.2 kPa)
0–10 to 0–830 inH
2
O (0–2.48 to 0–206 kPa)
Code Reserved for Future Option
0 None
Code Isolator Material Fill Fluid
A
B
(1)
316L SST Silicone
Hastelloy C-276 Silicone
Code Flange Style, Material
A
B
(1)
C
(1)
0
Coplanar , CS
Coplanar , SST (Required for Option Code S1 or S2)
Coplanar , Hastelloy C
Alternate Flange (See Option Codes FA, FB, FC, FD, FP, FQ, S5)
Code Drain/Vent Material
A
C
(1)
0
SST
Hastelloy C
None (Required for Option Code S5)
Code O-ring
1 Glass-filled TFE
Code Process Temperature Input (RTD ordered separately)
0
1
2
3
4
Fixed Process Temperature (no cable - RTD plug installed )
RTD Input with 12 ft (3.66 m) of Shielded Cable (Intended for use with conduit)
RTD Input with 24 ft (7.32 m) of Shielded Cable (Intended for use with conduit)
RTD Input with 12 ft (3.66 m) of Armored, Shielded Cable
RTD Input with 24 ft (7.32 m) of Armored, Shielded Cable
Code Controller Housing Material Conduit Entry Size
A
B
C
J
K
L
Polyurethane-covered Aluminum ½–14 NPT
Polyurethane-covered Aluminum M20 3 1.5 (CM20)
Polyurethane-covered Aluminum PG 13.5
316 SST ½–14 NPT
316 SST M20 3 1.5 (CM20)
316 SST PG 13.5
Code Terminal Block
A
B
Standard
With Integral Transient Protection
Code Meter
0
1
None
Local Operator Interface (LOI)
Code Bracket
0
1
None (Required for Option Codes FA, FB, FC, FD, FP, FQ, and S5)
Coplanar SST Flange Bracket for 2-in. Pipe or Panel Mount, SST bolts
Code Bolts
0
1
N
CS bolts
Austenitic 316 SST bolts
None (Required for Option Codes FA, FB, FC, FD, FP, FQ, and S5)
Code Approvals
0
A
B
C
D
F
G
H
None
FM Explosion-Proof Approval
FM Explosion-Proof Approval and Non-Incendive/Intrinsic Safety Approval Combination
CSA Explosion-Proof Approval
CSA Explosion-Proof Approval and Non-Incendive/Intrinsic Safety Approval Combination
BASEEFA/CENELEC Intrinsic Safety Certification
BASEEFA Type N Certification
ISSeP/CENELEC Flameproof Certification