Rosemount 3095 - Accessories

Rosemount Model 3095 Multivariable
™
Level Controller
6-8
Tagging
Three customer tagging options are available:
1. Standard SST tag is wired to the controller. Tag character height
is 0.125 in. (3.18 mm), 85 characters maximum.
2. Tag may be permanently stamped on controller nameplate upon
request. Tag character height is 0.0625 in. (1.59 mm), 65
characters maximum.
3. Tag may be stored in controller memory. Software tag
(8 characters maximum) is left blank unless specified.
Accessories
Optional Model 1199 Remote Diaphragm Seals
Model 3095 Level Controller and Model 1199 Remote Diaphragm Seals
are fully assembled, filled, calibrated, and pressure tested by the
factory. Refer to PDS 00813-0100-4016 for additional information.
Optional Three-Valve Manifolds
Anderson, Greenwood & Co. (Packaged Separately).
Description (Part Number)
Carbon Steel, M4AVIC (01151-0150-0001).
316 SST, M4AVIS (01151-0150-0002).
Temperature Sensors and Assemblies
Fisher-Rosemount offers many types of temperature sensors and
assemblies. Contact your Fisher-Rosemount Sales Engineer for a
product data sheet.
Model 333 HART Tri-Loop™ HART-to-Analog Signal Converter
The Model 333 HART Tri-Loop can be installed with the Level
Controller without disrupting existing device wiring. The Tri-Loop
provides up to three additional analog outputs for monitoring or other
controlling purposes.
The HART Tri-Loop accepts the Level Controller digital signal and
converts it to three independent 4–20 mA analog signals. Any of the
Model 3095 Level Controller process variables (DP, PT, level, or control
output) can be provided via the Tri-Loop.
For additional information on the HART Tri-Loop, see Product Data
Sheet 00813-0100-4754.