Rosemount 3095 - Options

B-3
Level Controller Accessories and Options
OPTIONS
Auto-Tuning
(Option Code CC)
The Model 3095 Level Controller can be supplied with auto-tuning for
level control. Auto-tuning determines the process parameters and
applies tuning rules to determine the optimal tuning parameters (gain,
reset, rate, and bias) for the PID equation. Refer to “Autotuner” on page
4-12 for information.
Local Operator Interface
The Level Controller is supplied blank as standard. An optional Local
Operator Interface (LOI) is available. The LOI allows the user to locally
change the setpoint and basic controller setup and provides local
display of process variables.
Custom Configuration
(Option Code C2)
Custom factory configuration allows a customer to receive a Model 3095
Level Controller configured for their specific application. A
Configuration Data Sheet (CDS 00806-0100-4741) must be
completed and returned to Rosemount. The CDS is shown in Section 6
of this manual.
External
Ground
Assembly
3095LC08
FIGURE
B
-1.
T
rans
i
ent
P
rotect
i
on
Terminal Block with
External Ground Assembly.