Figure 3-5. Device Dashboard - Service Tools
Home
1 Overview
2 Configure
3 Service Tools
Service Tools
1 Alerts
2 Variables
3 Trends
4 Maintenance
5 Simulate
3144 Wave 0_5 375 Menu Tree - Service Tools
Active Alerts
Active Alerts
1 Good- only if no alerts
2 Failed - Fix Now
3 Advisory
4 Maintenance – Fix Soon
Good- only if no alerts
1 No Active Alerts
Failed - Fix Now
1 Invalid Configuration
2 Electronics Failure
3 Calibration Error
4 Sensor Drift Alert Active
5 Sensor1 Open
6 Sensor2 Open
7 Sensor1 Shorted
8 Sensor2 Shorted
9 Terminal Temperature Failure
Maintenance – Fix Soon
1 Hot Backup Active
2 Sensor Drift Alert Active
3 Sensor1 Degraded
4 Sensor2 Degraded
5 Excess EMF
6 Sensor1 Out of Range
7 Sensor2 Out of Range
8 Terminal Temperature Out of Range
9 Primary Out of Limits
10 Analog Output Saturated
11 Analog Output Fixed
12 Configuration Changed
Advisory
1 Calibration Error
Variables
1 Variable Summary (Method)
2 Primary Variable
3 Secondary Variable
4 Third Variable
5 Fourth Variable
6 Analog Output
Primary Variable
1 Primary Variable is
2 Parameter
3 PV Gauge
Secondary Variable
1 Secondary Variable is
2 Parameter
3 SV Gauge
Third Variable
1 Third Variable is
2 Parameter
3 TV Gauge
Fourth Variable
1 Fourth Variable is
2 Parameter
3 FV Gauge
Analog Output
1 Analog Output Value
2 AO Gauge
Trends
1 Sensor 1 Temperature
2 Sensor 2 Temperature
3 Differential Temperature
4 Average Temperature
5 Terminal Temperature
6 First Good Temperature
Maintenance
1 Sensor Calibration
2 Perform Analog Trim
3 Perform Scaled Trim
4 Reset Processor
Simulate
1 Perform Loop Test
Sensor Calibration
1 Calibrate Sensors
2 Restore Factory Cal
3 Sensor 1 Lower Cal
4 Sensor 1 Upper Cal
5 Sensor 2 Lower Cal
6 Sensor 2 Upper Cal
7 Active Calibration
To Next Page
Loading...
