5. Measurements with the Piranha System
Cine/Pulsed Radiography
Piranha & QABrowser Reference Manual
2014-06/5.5C
102
5.3.1 kVp, Time, Dose, and Dose Rate
Use the same procedure as for the normal radiography measurement but select the
All... parameter.
If only Tube voltage is selected:
5.3.2 Pulse Measurements with Piranha Dose Probe
Use the same procedure as for the normal radiography measurement. Note that if it is
difficult to get a good pulse rate reading, you may use a manual pulse rate setting, as
described under Settings to get a dose per pulse reading.
43