5. Measurements with the Piranha System
Introduction
Piranha & QABrowser Reference Manual
2014-06/5.5C
88
5 Measurements with the Piranha System
Introduction5.1
The Piranha system can, depending on model, measure up to eight parameters
simultaneously plus three waveforms from a single exposure:
kVp
Dose and dose rate
Exposure time
HVL
Estimated total filtration and determined waveform type
mAs and mA
pulses
kV waveform
Dose rate waveform
mA waveform
various pulsed fluoroscopy parameters
Using the Piranha alone, 6 parameters and two waveforms can be measured
simultaneously.
To Next Page
Loading...
Need help?
General
