3. Description of the QABrowser
Favourites
2014-06/5.5C
63
Piranha & QABrowser Reference Manual
right Palm during a HotSync operation. And if you use a Palm with a PC which the Palm
have not been in contact before, then it is important to do a HotSync and create an
account.
3.6.2 Start here!
Start Here! is a function that makes it possible to define a default starting point for the
QABrowser. Assume that you mostly use the QABrowser for measurement on
radiography and that you use the real-time display to display all values.
Go to the screen where you want the QABrowser to start. Tap Start Here! to select this
screen as starting point for the QABrowser. You can now quit the QABrowser. Restart
and verify that it starts up with selected screen. Actually, Start Here! is a special case of
the Favourites, as described above, and can thus be found there.
QABrowser Setup3.7
The Piranha Setup is used to define different
parameters that control the function of the QABrowser
and Piranha. Open the QABrowser main menu and
select Setup.
To Next Page
Loading...
Need help?
General
