To Next Page

To Previous Page

2. Description of the Piranha

Maintenance

2014-06/5.5C

Piranha & QABrowser Reference Manual

2.6.2 Managing Detector Calibrations

RTI Detector Manager is a special Windows software that gives an overview of all

calibrations for the detectors and probes in your system. You will find the RTI Detector

Manager on your Product CD, in the folder \Software\RTI Detector Manager\.,Start the

file RTI Detector Manager.exe by double-clicking it.

Select the instrument of interest (Piranha)

and click OK.

If no instrument appears, check the

communication cable and that the Piranha is

powered on, then click Rescan.

Next, the available detectors

are shown to the left. The

Internal detector is always

available, but external probes

will only show up if they are

attached.

When clicking a detector, the

available calibrations will

show up to the right (In this

case the Internal detector is

highlighted). The TV and TF

columns show an × if there

are calibrations for Tube

Voltage and/or Total

Filtration. The factor column

shows the calibration factor

(for dose in this case).

Here is another example

(Piranha Dose Probe). This

type of detector only contains

a calibration factor for dose.

RTI Piranha Reference Manual

Other manuals for RTI Piranha