5. Measurements with the Piranha System
Fluoroscopy and Pulsed Fluoroscopy
2014-06/5.5C
111
Piranha & QABrowser Reference Manual
The following pictures illustrates how the Piranha system is used this type of
measurement.
These pictures describes the check of
the output levels in pulse fluoroscopy
mode (showing Barracuda MPD).
This example shows
measurements of dose/pulse,
dose rate, and pulse rate on an
ordinary C-arm system.
Example of more measurement done using this application:
The first slides are the measuring results of measuring on a 5 Hz fluoroscopy system
To Next Page
Loading...
