R5 SOLID AIS System
OPERATION
7000 118-200, C2 Page 29
List of predefined values: Use the ∧ ∨ keys to select between the predefined
values.
List of predefined values and numeric input:
In some of the views like the AIS Message Send view where it is possible to
send an SRM to a target, it is possible to select an MMSI in a list of predefined
values. The predefined MMSI values are the MMSI numbers that have been
received by the transponder. It is also possible to enter a new MMSI number
that has not been received yet. To do this, simply input a numerical value with
the ALPHANUMERIC KEYS.
Press ENTER when done. If desired, use the ARROW KEYPAD keys to select a new
parameter to be edited, or navigate to the Save/Send button located above the list of
parameters and press ENTER to save the parameters / send the message.
Use the ESC key to undo changes and to return to the previous view.
NOTE: DO NOT TURN OFF TRANSPONDER WITHIN 2 SECONDS OF A
PARAMETER CHANGE!
To Next Page
Loading...
