Saab R5 - Operational Mode Configuration; Ship Static Configuration

R5 SOLID AIS System
OPERATION
7000 118-200, C2 Page 32
Hazardous Cargo (X,Y,Z,OS)
Classification of current cargo according to X,Y,Z,OS
Draught (Inland)
The vertical distance measured from the lowest point of
a ship’s hull to the water surface, in meters (two
decimal precision)
Air Draught
The vertical distance measured from the ship’s
waterline to the ship’s highest point, in meters (two
decimal precision)
Hazardous Cargo (Blue Cones)
Blue cone classification of cargo
Loaded / Unloaded
Specifies if the ship cargo is loaded or unloaded
Crew Members
Number of crew members on board
Passengers
Number of passengers on board
Personnel
Number of shipboard personnel on board
4.4.2 Main Menu  Operational Mode
Parameter Name
Description
Tx Mode
This parameter determines the transmission of the R5
SOLID. If set to “Silent”, the R5 SOLID will be
completely silent on the VHF radio and it will not
answer on interrogations.
If a silent switch is used, this parameter will be locked
and “Silent Switch Used” will be displayed as
parameter value.
4.4.3 Main Menu  Config Ship Static
Parameter Name
Description
MMSI
Maritime Mobile Service Identity reported by own ship
IMO
International Maritime Organization number reported by
own ship
Ship Name
Ship name reported by own ship
Call Sign
Call sign reported by own ship. Shall be set to ATIS
code for Inland vessel installations.
Height over Keel
Height over keel in meters (one decimal precision).
Height over Keel information is sent as a response to
an “Extended Ship Static and Voyage Related Data”
request message.