12
English
Fig. 13
Fig. 14
5.2 Unpacking and
positioning
On reciept of the automatic vending machine make sure
that it has not suffered damage during transportation or
that the packaging has not been tampered with consequent
removal of internal parts.
An envelope is supplied with the vending machcine, called
“CUSTOMER KIT”, containing the objects shown in Fig.
14.
Fig. 15
Remove the protective transparent film and the four angle
bars (Fig. 15).
Where the vending machine needs to be positioned near
a wall, it is necessary to leave a space of at least 15cm
between the back and the wall to leave the air outlet grill
free (Fig. 13).
- Instruction booklet.
- Power cord.
- Disabling keys of doors safety microswitches
( Maintenance Technician).
- Labels with dispensed products and their
prices.
- Instruction plate.
- Sticker set for accepted coins.
If damage of any kind is found, it is necessary to notify
them to the transporter and inform the importer or the
seller immediately. In case these are not present in your
country, contact the manufacturing company directly.
Remove the envelope containing the following accessories
from the tray:
- No. 4 feet;
- No. 20 nails for spirals;
- No. 1 key for the coffee unit
To Next Page
Loading...
