Saeco D.A. COMBISNACK - Supply and Operation; HOT DRINKS Container Supply

25
English
7 SUPPLY AND
OPERATION
7.1 HOT DRINKS container
supply
Important
It is necessary to use soluble products considered suitable
for automatic distribution .
During the programming phase, when the display shows:
“BEVERAGE PREPARATION” (see 8.2.3), pour lyophilized
products into the relevant containers.
7.1.1 Soluble product supply
Rotate the container locking lever clockwise (Fig. 61).
Fig. 61
Fig. 62
Remove the container (Fig. 62).
Pour the soluble product into the container (Fig. 64) without
exceeding 2/3 of the maximum capacity.
Move the container to the supporting bracket (Fig. 63).
Fig. 64
Fig. 63
Replace the lid on the container and carry out the inverse
procedure.