Saeco D.A. COMBISNACK User Manual

6
English
The Maintenance Technician must read carefully and
respect the warnings on safety contained in this manual
so that every intervention concerning installation,
activation, operation and maintenance will be carried out
under safe conditions.
It is the Maintenance Technician’s absolute responsiblity to
give the access keys to the inside of the machine to another
operator (Supply Operator). The responsibility of each
intervention remains solely with the Maintenance Technician.
This manual is an integral part of the machine and must
be read carefully before performing any operation.
2.2 Description and intended use
The upper part of the vending machine, called HOT
DRINKS, is intended for automatic distribution of coffee
and hot beverages (decaffeinated coffee, cappuccino,
chocolate, etc.) and is programmable for every single type
of dispensing. The soluble products must be consumed
immediately, they cannot be conserved for long.
The lower part of the machine, called SNACKS, is
intended for the sale of packed food (biscuits, chocolate,
chips, cans, plastic bottles).
The machine has been designed for the sale and distribution
of packed products that do not need to be refrigerated for
their conservation or maintained at constant temperatures.
Follow the indications on the products for the conservation
advice and the expiry date. COMBISNACK is not a
refrigerator, but it allows moderate refrigeration of the
products that are loaded into the trays.
Any other use is to be considered improper and therefore
dangerous.
Do not introduce into the VM any product which may be
subject to dangerous changes of temperature.
Important
Improper use of the machine determines the immediate
warranty expiration and the Manufacturer declines any
responsibility for damages and personal injuries.
Improper use includes:
- using the machine for purposes other than those
intended and/or following procedures that are not
described in this manual;
- any action on the machine that does not comply with
nstructions included in this manual;
- any alteration to components and/or safety devices
not previously authorized by the Manufacturer and
carried out by staff not authorized for such operations.
- whatever location of the appliance not foreseen in this
manual.
2.3 Machine identification
The machine is identified by the model and serial numbers
outlined on the specific plate (Fig. 2).
The plate contains the following data:
- name of Manufacturer;
- Marks of compliance;
- model;
- serial number;
- manufacturing year and month;
- mains voltage (V);
- mains frequency (Hz);
- power consumption (W);
- maximum power of the bulb to be used (W);
- class of the refrigerating unit;
- type and charge of the refrigerating gas used.
Warning
It is absolutely forbidden to tamper with or modify the data
plate.
Important
When contacting AUTHORIZED CUSTOMER SERVICE
CENTERS always refer to the plate and the specific data it
contains.
Fig. 2
Data plate

Saeco D.A. COMBISNACK Specifications

General

Brand	Saeco
Model	D.A. COMBISNACK
Category	Vending machines
Language	English