Saeco D.A. COMBISNACK

To Next Page

To Previous Page

English

Fig. 19

Fig. 21

Fig. 22

Fig. 20

Important

If the area can only be reached through a transpallet, follow

this procedure:

Place two spacers (more than 10 cm in height) under the

vending machine feet.

Rest the vending machine on the spacers very carefully

(Fig.19).

Use a transpallet to bring the vending machine into the

installation area (Fig.20).

Lean the vending machine slightly and remove the first

spacer (Fig. 21).

Lean the vending machine slightly on the opposite side

and remove the second spacer (Fig. 22).

Saeco D.A. COMBISNACK - Page 14