2 • Getting Started ER-260/265 Electronic Cash Register AU
Unpacking
1. Unpack and unwrap the cash register.
2. Locate in the packing the following items:
• 1 roll of paper
• 1 rewind spindle
• 1 set of control keys
• This Operation and Programming Manual,
3. Remove the cardboard protectors from the cash drawer.
4. Plug the register into a grounded outlet (three prong), insert a control key and turn the key
to the REG control lock position.
Installing the Paper
When you have an ER-260/265 with EPROM v 05.000 and later, please follow the steps to install
paper into the register.
1. Remove the printer cover.
2. Push the yellow cap lever and lift up the platen roller.
To Next Page
Loading...
