ER-260/265 Electronic Cash Register AU Program Mode Programming • 55
Program Mode Programming
Default Programming
• All keyboard Departments are taxable and preset, without entry limits by default status
programming of "310" (EPROM v01.014A and later); are taxable and open, without
entry limits by default status programming of "10" (EPROM v01.013A and earlier).
• All PLUs are taxable and preset, without entry limits by default status programming of
"110".
• All system options are set to 0 in default programming, unless otherwise noted. Change
only the options that will deviate from default programming. There is no need to re-enter an
option status of 0, since 0 is its original setting.
• All programming (unless otherwise noted) is done with the control lock in the P position.
Each section details a specific area of register programming.
• The Default program is set to 10.000% VAT on Tax 1 and the description is set to GST
already.
To Next Page
Loading...
