Sam4s ER-260 - System Option Table

70 • Program Mode Programming ER-260/265 Electronic Cash Register AU
System Option Table
NOTE: Bold font is the default settings. In other words, the Bold font setting indicates the way
the register is automatically set up after.
Option No. SYSTEM OPTION STATUS
1
Print the grand total on X,Z report.
YES = 0
NO = 1
2
Print the gross total on X,Z report.
YES = 0
NO = 1
3
Reset the consecutive number counter after a Z report.
NO = 0
YES = 1
4
Reset the Z counter after Z report.
NO = 0
YES = 1
5
Skip totals with zero value on X,Z report.
YES = 0
NO = 1
6
Reset the grand total after a Z report.
NO = 0
YES = 1
7
Print the subtotal when pressed.
YES = 0
NO = 1
8
Cash must be declared before X,Z report.
NO = 0
YES = 1
9
Allow X reports
YES = 0
NO = 1
0 = none
1 = 1 place
2 = 2 places
10
Decimal point position
3 = 3 places
Select a method for tax printing:
Print tax amounts separately
0
Print only total of all taxes
1
Print Taxable Totals.
Do not print tax amounts
2
Print tax amounts
3
Print only total of all taxes
4
11
Do not print Taxable Total.
Do not print tax amounts
5
Round up at 0.50
0
Always Round up 1
12
Rounding method for percentage key and
tax.
Always Round down 2
Round up at 0.50 0
Always Round up 1
13
Rounding method for decimal
multiplication and split pricing.
Always Round down 2
14
Allow Post Tender.
NO = 0
YES = 1
15
Allow Check Cashing.
NO = 0
YES = 1