58 • Program Mode Programming ER-260/265 Electronic Cash Register AU
Programming Tax
You can be programmed by entering a tax percentage rate
Programming a Tax Rate Percentage
1. Turn the control lock to the PGM position.
2. Enter the rate, with a decimal. 0.000-99.999. It is not necessary to enter proceeding zeros.
For example, for 6%, enter 06.000 or 6.000.)
3. Enter 10.
4. Enter:
1
to set GST rate
2
to set tax 2 rate
3
to set tax 3 rate
4
to set tax 4 rate
5. Press the TAX key.
6. Press the CASH/TEND key to end programming.
7. See tax rate program examples.
Tax Rate Programming Flowchart
. TAX 0 1
Tax Rate
Tax #
CASH/
TEND
Please Note: After programming the tax rate, you must program your
department or departments taxable to calculate tax. See “department
programming” steps.
Tax Rate Programming Example
If tax 1 is 10 percent GST, enter:
0 . TAX 0 1 0 0 0 1 1
Press the CASH/TEND key to end programming.
CASH/
TEND
The rates you have entered will display and print on
the printer:
___
_
THANK_YOU
___CALL_AGAIN
GST STATUS 10
GST RATE 10.000
_______PROGRAM TERMINATE
16:36 03-01-2006
000050 00
To Next Page
Loading...
