Sam4s ER-260 - Tendering a Check Sale; Totaling a Charge Sale

40 • Operating Instructions ER-260/265 Electronic Cash Register AU
Tendering a Check Sale
1. Register the items you wish to sell.
2. Enter the amount tendered by the customer.
For example, for $20.00 enter:
0 0 0 2
3. Press CHECK:
CHECK
4. The display will indicate “C” for change, the
drawer will open and the receipt will print as in
the example on the right.
_ ___THANK_YOU
___CALL_AGAIN
DEPT.1____________T1 $2.99
DEPT.1____________T1 $2.99
4 X $1.99
DEPT.2____________T1 $7.96
SUBTOTAL $13.94
GST AMOUNT $1.27
TOTAL $13.94
CHECK $20.00
CHANGE $6.05
16:52 03-01-2006
000038 00
Totaling a Charge Sale
1. Register the items you wish to sell.
2. Press CHARGE:
CHARGE
3. The display will indicate “=” for total, the drawer
will open and the receipt will print as in the
example on the right.
NOTE: Charge tendering is not allowed.
_ ___THANK_YOU
___CALL_AGAIN
DEPT.1____________T1 $2.99
DEPT.1____________T1 $2.99
4 X $1.99
DEPT.2____________T1 $7.96
SUBTOTAL $13.94
GST AMOUNT $1.27
CHARGE $13.94
16:52 03-01-2006
000039 00
The descriptor of CHARGE key has been modified to “EFTPOS” from EPROM version 01.013A,
but the default keyboard layout remains CHARGE.